(Your shopping cart is empty)

Search

  Home > AutoLoad Loaders >

AUTOLOAD AL, 1.5" LINE SIZE, 110VAC, SINGLE INLET
AUTOLOAD AL, 1.5" LINE SIZE, 110VAC, SINGLE INLET
 
CONFIGURE YOUR LOADER BELOW
ALL CATAGORIES MUST HAVE A SELECTION
Our Price: $1,570.00



Availability:: Usually Ships in 1 to 2 Business Days
Product Code: AL-1650-COMPLETE

SELECT CONTROLLER:

STANDARD CONTROLLER- The control unit receives a signal from the sightglass sensor, which turns on the controller and supplies air to the venturi to move the material.
OVERFILL W/LOW LEVEL ALARM [Add $315.00]- With this control, the operator has the ability to load for an additional 30 seconds beyond the signal time from the sensor (which stops the loading cycle). Material continues to fill the hopper above the sightglass assembly. This feature is used to accommodate larger shot sizes than the loader sight-glass capacity permits. This optional control also has a low material level alarm with a delay. If the loader “calls for material” and the material bin is empty, an audible alarm sounds. There is also an output for a strobe.
SELECT MATERIAL PICKUP:

STANDARD ACCELERATOR (AC-5150)- Select when non-abrasive material will be drawn from a vacuum take-off such as on a hopper. Aluminum construction. This unit is 1.25" adapted up to 1.5" at material hose connection.
STANDARD WAND (WN-6150) [Add $110.00]- Select when non-abrasive material will be drawn from a gaylord or barrel. Aluminum construction. 1.25" wand with 1.5" hose connection.
UPGRADE 1.5" WAND (WN-6150S) [Add $118.00]- Select when hard-to-flow non-abrasive material will be drawn from a gaylord or barrel. Aluminum and stainless steel construction. This is a true 1.5" wand. This option may delay shipment of your loader.
SELECT MATERIAL HOSE:


SELECT MOUNTING PLATE:

THROAT MOUNT TO IMM- 5.75" x 5.75" base, material exit is flush with bottom of plate.
FEED HOPPER MOUNT 2IN- 5.75" x 5.75" base with material exit extending 2" below flange to prevent overfilling hopper. Includes vent plugs for optional venting.
DRYING HOPPER MOUNT 6IN- 5.75" x 5.75" base with material exit extending 6" below flange to prevent overfilling hopper.
MOUNTING PLATE PATTERN:

- To have your loader arrive ready-to-run, we can drill the mounting pattern in the base plate. Please specify the hole pattern and bolt size or leave blank to drill your own holes.
ACCESSORIES:

NO ACCESSORIES
AL MAGNETS [Add $140.00]- Catch ferrous metal debris with our Rare Earth Magnet metal separator, the strongest magnets available.

Qty:  
Description
 
  • The AUTOLOAD is the most popular pneumatic loader.
  • Larger hose and inlet diameter improves flow of regrinds.
  • Maximum throughput up to 1000lb/hr of virgin and regrind.
  • The model AL is NOT SUITABLE FOR USE WITH ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with material.
  • The AL mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with the AL, down time for cleaning hoppers will be a thing of the past.
  • Only 30" tall.
Features
    • Stainless Steel & Anodized Aluminum Construction
    • Whisper Quiet
    • Easy to Clean
    • Install in Minutes with Custom Adapters

Spare Parts for this product...
(AL-AF15) FILTER W/SCREEN (PA-1857)
Our Price: $55.00

Add
(AL-AF15) FILTER W/SCREEN (PA-1857)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AutoLoad Loaders


03576 HEATER ELEMENT 2000 WATTS 230VAC $329.00
48101 CLAMP,V-BAND, 16",LEVER,WIDE $202.00
(AC-5125 CP-S) SUPER STEEL 1.25" ACCELERATOR ASSEMBLY $447.00
51559 LANCE, VACUUM, 1-1/2", ADJUSTABLE $205.00
(SRG-SCS2530-10) SCREEN, S25-30 10MM (025012062) $152.00
(HP-1525 KFS) 1 1/4 SINGLE HOPPER W/KNOB $933.00
(SRG-SCS2545-04) SCREEN, S25-45 04MM (026012064) $244.00
(SRG-SCS2545-05) SCREEN, S25-45 05MM (026012063) $252.00
(SRG-SCN1722-05) STAINLESS SCREEN 5MM $163.00