(Your shopping cart is empty)

Search

  Home > AutoLoad Loaders >

AUTOLOAD AL, 1.25" LINE SIZE, 110VAC, DUAL INLET
AUTOLOAD AL, 1.25" LINE SIZE, 110VAC, DUAL INLET
 
Alternative Views:
CONFIGURE YOUR LOADER BELOW
ALL CATAGORIES MUST HAVE A SELECTION
Our Price: $2,110.00



Availability:: Usually Ships in 1 to 2 Business Days
Product Code: AL-1555-COMPLETE

SELECT CONTROLLER:

STANDARD DUAL CONTROLLER- The control unit receives a signal from the sight-glass sensor, which turns on the controller and supplies air to the venturi to move the material. Adjusting the air pressure at each regulator controls how much material is conveyed during the load time.
OVERFILL DUAL W/LOW LEVEL ALARM [Add $315.00]- The Overfill Timer is used to fill the hopper. This allows fewer load cycles per hour when smaller shots are being run and creates a greater buffer when running the larger shots. The Low Material Alarm is used to know when the material source is empty or is not feeding. This will sound the siren alarm can will illuminate an optional strobe light.
SELECT MATERIAL PICKUP:

ACCELERATOR (AC-5125 STEE)- Select when non or semi-abrasive material will be drawn from a vacuum take-off such as on a hopper. Aluminum construction with a steel insert.
WAND (WN-6125 STL) [Add $110.00]- Select when non or semi-abrasive material will be drawn from a gaylord or barrel. Aluminum construction with steel insert.
SELECT MATERIAL PICKUP 2:

ACCELERATOR (AC-5125 STEE)- Select when non or semi-abrasive material will be drawn from a vacuum take-off such as on a hopper. Aluminum construction with a steel insert.
STANDARD WAND (WN-6125) [Add $110.00]- Select when material will be drawn from a gaylord or barrel.
REINFORCED WAND (WN-6125 STL) [Add $110.00]- Select when non or semi-abrasive material will be drawn from a gaylord or barrel. Aluminum construction with steel insert.
SELECT MATERIAL HOSE:


SELECT MATERIAL HOSE 2:


SELECT MOUNTING PLATE:

THROAT MOUNT TO IMM- 5.75" x 5.75" base, material exit is flush with bottom of plate.
FEED HOPPER MOUNT 2IN- 5.75" x 5.75" base with material exit extending 2" below flange to prevent overfilling hopper. Includes vent plugs for optional venting.
DRYING HOPPER MOUNT 6IN- 5.75" x 5.75" base with material exit extending 6" below flange to prevent overfilling hopper.
MOUNTING PLATE PATTERN:

- To have your loader arrive ready-to-run, we can drill the mounting pattern in the base plate. Please specify the hole pattern and bolt size or leave blank to drill your own holes.
ACCESSORIES:

NO ACCESSORIES
AL MAGNETS [Add $140.00]- Catch ferrous metal debris with our Rare Earth Magnet metal separator, the strongest magnets available.

Qty:  
Description
 
  • The AUTOLOAD is the most popular dual-inlet pneumatic loader.
  • Proven product with thousands sold.
  • Maximum throughput up to 1000lb/hr of virgin and regrind.
  • The model AL is NOT SUITABLE FOR USE WITH ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with precise amounts of virgin and regrind or color material.
  • The AL mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with the AL, down time for cleaning hoppers will be a thing of the past.
  • Only 30" tall.
Features
    • Stainless Steel & Anodized Aluminum Construction
    • Whisper Quiet
    • Easy to Clean
    • Install in Minutes with Custom Adapters

Spare Parts for this product...
(AL-AF15) FILTER W/SCREEN (PA-1857)
Our Price: $55.00

Add
(AL-AF15) FILTER W/SCREEN (PA-1857)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AutoLoad Loaders


(SRG-SCS2545-04) SCREEN, S25-45 04MM (026012064) $244.00
(WN-6125 SUPE) SUPER 1.25" WAND ASSEMBLY $228.00
(SG-SUPRTROD) SUPPORT ROD-SIGHT GLASS ASSY $35.00
AUTOLOAD AL, 1.5" LINE SIZE, 110VAC, DUAL INLET $2,020.00
(SRG-SCS2530-08) SCREEN, S25-30 08MM (025012061) $170.00
(HP-1555 KFS) 1 1/4 DOUBLE HOPPER W/KNOB $1,078.00
AUTOLOAD AL, 1.5" LINE SIZE, 110VAC, SINGLE INLET $1,570.00
(SG-1000) SIGHT GLASS TUBE $76.00