(Your shopping cart is empty)

Search

  Home > AutoLoad Loaders >

AUTOLOAD CL, 1.25" LINE SIZE, 110VAC, SINGLE INLET
AUTOLOAD CL, 1.25" LINE SIZE, 110VAC, SINGLE INLET
 
CONFIGURE YOUR LOADER BELOW
ALL CATAGORIES MUST HAVE A SELECTION
Our Price: $1,740.00



Availability:: Usually Ships in 1 to 2 Business Days
Product Code: CL-1525-COMPLETE

SELECT CONTROLLER:

STANDARD CONTROLLER- The control unit receives a signal from the sightglass sensor, which turns on the controller and supplies air to the venturi to move the material.
OVERFILL W/LOW LEVEL ALARM [Add $315.00]- With this control, the operator has the ability to load for an additional 30 seconds beyond the signal time from the sensor (which stops the loading cycle). Material continues to fill the hopper above the sightglass assembly. This feature is used to accommodate larger shot sizes than the loader sight-glass capacity permits. This optional control also has a low material level alarm with a delay. If the loader “calls for material” and the material bin is empty, an audible alarm sounds. There is also an output for a strobe.
SELECT MATERIAL PICKUP:

ACCELERATOR (AC-5125 STEE)- Select when non or semi-abrasive material will be drawn from a vacuum take-off such as on a hopper. Aluminum construction with a steel insert.
WAND (WN-6125 STL) [Add $110.00]- Select when non or semi-abrasive material will be drawn from a gaylord or barrel. Aluminum construction with steel insert.
SELECT MATERIAL HOSE:


SELECT MOUNTING PLATE:

THROAT MOUNT TO IMM- 5.75" x 5.75" base, material exit is flush with bottom of plate.
FEED HOPPER MOUNT 2IN- 5.75" x 5.75" base with material exit extending 2" below flange to prevent overfilling hopper. Includes vent plugs for optional venting.
DRYING HOPPER MOUNT 6IN- 5.75" x 5.75" base with material exit extending 6" below flange to prevent overfilling hopper.
MOUNTING PLATE PATTERN:

- To have your loader arrive ready-to-run, we can drill the mounting pattern in the base plate. Please specify the hole pattern and bolt size or leave blank to drill your own holes.
SELECT EXHAUST HOSE:


ACCESSORIES:

NO ACCESSORIES
AL MAGNETS [Add $140.00]- Catch ferrous metal debris with our Rare Earth Magnet metal separator, the strongest magnets available.

Qty:  
Description
 
The model CL is designed for cleanroom applications. A 10 ft. exhaust hose is supplied to allow the exhaust air to be vented outside of the cleanroom.
  • The AUTOLOAD is the most popular single-inlet pneumatic loader.
  • Proven product with thousands sold.
  • Maximum throughput up to 1000lb/hr of virgin and regrind.
  • The model CL is NOT SUITABLE FOR USE WITH ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with material.
  • The CL mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with an AutoLoad, down time for cleaning hoppers will be a thing of the past.
  • Only 30" tall.
Features
    • Stainless Steel & Anodized Aluminum Construction
    • Whisper Quiet
    • Easy to Clean
    • Install in Minutes with Custom Adapters

Spare Parts for this product...
(FL-BAG FILTE) 5 MICRON FILTER BAG W/CLOSING SLIDE
Our Price: $125.00

Add
(FL-BAG FILTE) 5 MICRON FILTER BAG W/CLOSING SLIDE

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

AutoLoad Loaders


(SG-SUPRTROD) SUPPORT ROD-SIGHT GLASS ASSY $35.00
(SRG-KB303084000) BOLT SET S30-50-3K $61.00
AUTOLOAD AL, 1.5" LINE SIZE, 110VAC, DUAL INLET $2,020.00
AUTOLOAD AL, 1.25" LINE SIZE, 110VAC, DUAL INLET $2,110.00
(HP-1555 ASSY) 1 1/4 DOUBLE HOPPER/FILTER ASY $1,373.00
(WN-6125 SUPE) SUPER 1.25" WAND ASSEMBLY $228.00
(AC-5125 CP-S) SUPER STEEL 1.25" ACCELERATOR ASSEMBLY $447.00
(SRG-SCN1722-05) STAINLESS SCREEN 5MM $163.00
(SRG-SCS2545-05) SCREEN, S25-45 05MM (026012063) $252.00