Welcome.



 

 



(CB-2500) AUTOLOAD COLLECTOR BOXES AUTOLOAD JR-SERIES II, 1.25" LINE SIZE, 110VAC, SINGLE INLET
Our Price: $937.00
more info
(CB-2500) AUTOLOAD COLLECTOR BOXES AUTOLOAD JR-SERIES II, 1.25" LINE SIZE, 110VAC, SINGLE INLET
Each Autoload Collector Box comes standard with a 1.5” outlet which the Autoload Accelerator (venturi) plugs into (accelerator sold separately).
Collection boxes are available with up to 6-outlets and each box comes with a Universal Mounting Plate to accommodate up to a 6x6 square bolt pattern on a drying hopper.
  • The Series II AUTOLOAD JR is a new take on our classic JR.
  • Simplified design with new pop-off filter at an even more economical price.
  • Maximum throughput up to 100lb/hr of VIRGIN material.
  • The Series II Autoload JR is NOT SUITABLE FOR USE WITH REGRIND OR ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with material.
  • The JR mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with the JR, down time for cleaning hoppers will be a thing of the past.
  • At under 12" tall, the ALII-JR is great for low clearance applications.
AUTOLOAD AL, 1.25" LINE SIZE, 110VAC, SINGLE INLET (CU-OVII) RETROFIT, ADVANCED CONTROL UNIT
Our Price: $1,344.00
more info
Our Price: $499.00
more info
AUTOLOAD AL, 1.25" LINE SIZE, 110VAC, SINGLE INLET (CU-OVII) RETROFIT, ADVANCED CONTROL UNIT
  • The AUTOLOAD model AL is the most popular single-inlet pneumatic loader.
  • Proven product with thousands sold.
  • Maximum throughput up to 1000lb/hr of virgin and regrind.
  • This AL model is NOT SUITABLE FOR USE WITH ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with material.
  • The AL mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with the AL, down time for cleaning hoppers will be a thing of the past.
  • Only 30" tall.
Upgrade your existing Autoload or competitor's pneumatic loader with this advanced control. This unit is compatible with all previous generations of Autoload standard and Overfill controls. Just remove the existing control that is held on by one nut and put this in it's place. No wire nuts, no crimp terminals, everything terminates directly to a board mount connector. Works with 120v or 220v solenoids and power supplies.

The advanced control incorporates a clever electronic control that adds features such as:
  • Overfilling (add up to 30 seconds of load time after the sensor detects material)
  • Audible and Visual alarm if you've run out of material at the source
  • Visual indication of operating status
  • Optional strobe light to alert operator if in alarm
  • Improved control box mounting
  • Control one or two material sources from the same hardware
AUTOLOAD FL, 1.25" LINE SIZE, 110VAC, SINGLE INLET AUTOLOAD JR, 1.25" LINE SIZE, 110VAC, SINGLE INLET
Our Price: $1,509.00
more info
Our Price: $1,020.00
more info
AUTOLOAD FL, 1.25" LINE SIZE, 110VAC, SINGLE INLET AUTOLOAD JR, 1.25" LINE SIZE, 110VAC, SINGLE INLET
The model FL can be used for Thermoset Machines and is ideal for regrind processing. The hanging polyester felt filter bag is rated at 5 microns. This unit can also be used for high dust thermoplastic resins. Includes all mounting and connection hardware so you are up and running quickly.
  • The AUTOLOAD is the most popular single-inlet pneumatic loader.
  • Proven product with thousands sold.
  • Maximum throughput up to 1000lb/hr of virgin and regrind.
  • The model FL is NOT SUITABLE FOR USE WITH ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with material.
  • The FL mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with an AutoLoad, down time for cleaning hoppers will be a thing of the past.
  • Only 30" tall.
  • The classic AUTOLOAD JR is the ideal AUTOMATIC loading system for small molding machine operations.
  • Proven product with thousands sold.
  • Maximum throughput up to 100lb/hr of VIRGIN material.
  • The JR is NOT SUITABLE FOR USE WITH REGRIND OR ABRASIVE MATERIAL.
  • Includes everything you need to quickly load your machine with material.
  • The JR mounts directly onto the machine throat and is easy to install with our custom adapters.
  • Quick material changes are routine with the JR, down time for cleaning hoppers will be a thing of the past.
  • At under 14" tall, the JR is great for low clearance applications.